Month: November 2019

Car Wrap Marketing

Car wrap marketing can be very effective because it is not aggressive; it is mobile and cheap compared with other marketing methods. You can run your marketing message and do brand awareness for years with a good wrap or make regular changes to match your needs. If you have a fleet, car wraps can come in handy in giving you uniformity and still pass desired messages to your target audience.

Car wrap companies use different materials to get the job done and it is one of the decisions you will need to make when choosing your wrap.

  • Vinyl – The material is durable and very clean in giving solid color changes or stunning graphic changes to the car. It is lightweight and economical and can be used to cover the entire surface, including complex curves and bumpers. Its adhesive surface has air egress channels, allowing air bubbles to smooth out between the vinyl warp and the surface of the car for a painted silky fresh look. The material will protect the original paint from harmful elements.
  • Chrome vinyl wrap – It is a great material if you want to stand out because it has a reflective sheen that gives a clear top coat illusion. You will achieve a very shiny car at the end of the application.
  • Carbon fiber vinyl – It has a rugged feel compared to the chrome vinyl and has textured 3D appearance giving a dramatic unique appearance. You will love the textured, embossed finish that the wrap will achieve for you.
  • Matte vinyl – It has a non-glossy but dramatic look nonetheless. It is most suitable for individuals looking for a stealth unique look.

Exterior Parts of a Car

  • Bumpers: besides that it can be a decorative part on the exterior of the car, it also has an important function. It is the part that gets hit first before the rest of the car gets damaged upon impact. This does not help the driver if there are high speeds involved but rather in the event of the parking accident or minor fender bender.
  • Bonnets: this is the obvious one on the list. It protects the engine from rain and other weather conditions. It is a major shield against dust and contaminants. Remember that like the human body, foreign objects in the blood stream could impact the functioning of the entire system. Clean fluids are important in the engine as it is in the human body.
  • Engine splash shield: this part is located directly beneath the engine. It is made of a heat and corrosion resistant plastic that is usually attached with a special resin. This has the same function as the bonnet but from the bottom. It may be called a splash shield but it also prevents any dust, stones and mud from entering the engine. If this part is no longer attached correctly, you can hear the flapping against the road when driving at high speeds.
  • Wheels: The whole assembly of the wheel (rims, tyres, axles, etc.) is what gives the car its motion. What impacts the performance depends on the tyres that have been used.
  • Chassis: The shell of the car gives it aerodynamic capabilities. Air flows easily around an aerodynamic shape because of the lack of air friction therefore the car is able to move faster. Too much of this friction will slow down the car. If the chassis is close to the ground, the aerodynamics is increased.

Aston Martin DB9 Convertible

Though it had got some updates but the exterior facet including the classic proportions and graceful stance remained somewhat unchanged. However, several new details have been added to the latest convertible model, which were missing in the predecessor. For instance, the headlights are more angular and swept-back than before whereas the front fascia has received a streamlined single-intake design.
Talking to the styling, the DB9 Convertible is one of the most beautiful cars that a person can ever own. Despite a few amendments and upgrade, the model still carries off the classic Aston look with much ease. Though it has a classic exterior, it has a few modifications and improvements in the materials and texture to offer a more beautiful cabin that is exquisitely crafted and well finished.

The Vol ante model isn’t as stiff as the Coupe, but both the variants are a driver’s delight. It offers massive thrills with the added sensation of speed and wind as well as noise that a convertible allows. Also, the sound of 510bhp V12 bouncing off walls makes the driving more sensational. Whether Vol-ante or Coupe, some features are same – 0-62mph time of 4.6-seconds and the three-mode suspension. It turns in sharply and offers masses of grip to grant more control while driving. The carbon ceramic brakes are fitted as standard are excellent and has awesome stopping power. Even if there is a tiny bit of body shake, the vehicle is remarkably stable and offers a smooth ride.

The first models which sold in 2004 have been refined and honed with reliability improving all the while. The engine – 6.0-litre V12 – is well proven and used throughout the Aston range leaving no scope for bugs. Driver would not feel any problem with engine, transmission or drive line thus reliability is ensured. In terms of quality, the interior is well made to withstand the test of time. Both Coupe and Vol ante of DB9 Convertible have standard safety kit like airbags, traction and stability control as well as new front end to meet pedestrian safety legislation. In all of this, it maintains the traditional Aston front grille.

Working Around a Transporter Car

The most important thing someone around heavy machinery can do is stay alert. There are two different types of transporter cars. Some run on tracks. When working around a transporter car that runs on a track you not only need to pay attention to the car but also the tracks. Most tracks are inset into the floor but still pose a real injury risk if someone trips or falls on them. If a transporter cars not on a tract it is important to stay alert and out of its way. These machines are incredibly heavy and can cause significant damage if someone runs and that I am while carrying an object or not paying attention.

As with all heavy machinery another simple way to create a safe working environment is by adhering to the recommended maintenance schedule. If a transporter car is poorly maintained there are a variety of different ways it can cause serious injury. It can become unbalanced and topple over onto an unsuspecting coworker. It could also force the objects it is carrying to fall.

It can be difficult to effectively communicate in a manufacturing or production environment because the spaces are typically very loud. At the same time it is important to develop an effective system of communication, either verbal or nonverbal. With effective communication everyone will know what is going on and where the potential injury risks are. Communication is a basic tenet of safe workplaces, especially around heavy machinery.

The primary purpose of a car is to move exceptionally heavy objects from one area to another. When loading a transporter car it is essential that all of the objects being moved are balanced and appropriately secured. This will limit the risk of the payload toppling during transport. A payload accidentally falling off is not only incredibly dangerous but also one of the hardest injury risks to predict.

Transporter cars can be an incredibly useful tool but only if you safely and properly. It is essential that all personnel it here to the company safe working practices as well as the recommended safety instructions which accompany every piece of heavy machinery.

Enhance the Look of Your Vehicle

Car accessories have always been a topic of discussion for the majority of car owners sitting worldwide. These trendy add-ons play a great part when it comes to providing an astounding look to your car and catching other people’s eye. In earlier times, these accessories were built with just one intention, i.e. for off-road purpose. But with the advancement in technology, there has been a drastic change in its basic intention. Today, it has become a symbol of elegance for many, around the world. Moreover, it is important that you choose the right accessories for your vehicle, as there are plenty of options available in the market that vary in design, size, form and cost.

Written below are a few things that you can do, in order to enhance the look of your vehicle, which includes:

  • Carry out your research part – Go online and gather as much info you can. Making use of the internet is the best way to grab some good ideas about vehicle accessories. There are many websites and blogs that are available online and are free to browse.
  • Determine what exactly are you looking for – It’s important that you decide which accessories you would like to have installed in your vehicle. Once you have decided, the next big step is to set your budget accordingly.
  • Set your budget – In order to enhance your vehicle’s performance, you must think of saving up your expenses instead of spending too much of money unnecessarily. Furthermore, you must hire a professional in order to take care of the complete installation process.
  • Talk to all but select the best one – Once you have shortlisted a list of experts, your next step would be to contact them and make them know your demands. This is the best way to get the answers to all your questions. Also, you must check their background, experience, and check whether they are trustworthy or not.

Repair a Tyre Puncture

  1. Enable the handbrake to avoid the opposite tyre spinning uncontrollably.
  2. Keep in mind that you need to have a plugging kit to sort this problem out and you won’t need to remove the tyre unless you cannot reach the puncture. Some may find that it’s easier to remove the tyre. If you are in a rush to go somewhere then keep the tyre attached to the car.
  3. The most important part about repairing punctures is finding the actual hole. This might be the process that will take the longest. You might also have to remove what has been lodged within the rubber before doing anything else.
  4. Make sure that you clean the area which has been punctured to avoid any foreign objects entering the inside of the tyre.
  5. You need to add lubricant to the puncture using an insertion tool before treading the plugging cord through the puncture.
  6. The plugging cord needs to be hanging out of the tyre and cut after the insertion tool has been removed.
  7. Inflate your tyre to the correct pressure using a pressure gauge. This will make it easier for you to make sure that there are no leakages or escaping air.
  8. It’s important to check the tyre for any leaks as you can never be too sure that you have more than one puncture. The last thing you want is to have to deal with the same process again.
  9. Once this is done you need to ensure that you drive slowly as the plug may not hold as well as a professional fix.

A puncture in the side wall is irreparable as the pressure that will be applied after you continue driving will break it once again. If this does happen you need to have a spare tyre in your car or you will have to call the towing service to get a replacement.

Use Pink on Your Car

Avoid painting the entire car with this colour. Pink is an overwhelming colour that distracts many people. The main colour should not be pink. The main colour should be black or white. Pink is an overwhelming colour and can be seen clearly as a small detail in the car. You also want to avoid the car looking like something that belongs to a doll.

Don’t paint the mirror covers completely in pink. It is a difficult colour to see on the road. Allow black edging as an outline to other drivers.

The roof of the car can be changed to this extraordinary colour. The roof might be one of the surfaces that is barely noticed by anyone. Why? This is mainly because the roof doesn’t have any performance peaks besides aerodynamics. Not many people take note of that shape.

Hot pink may be too overwhelming for most people. You can try pearly pink instead. The benefit of having this toned down pink shade is that you can match the wheels with this colour and it won’t be such a conspicuous car. It will look classy and feminine.

The interior is where you can really express yourself with the colour. Because it’s your own personal space you can use as much colour as you want. Try to avoid it looking like a plastic car, though. To make this look really work on all aspects, keep the pink at bay by using it on the smaller components such as the steering wheel and streaks on the leather of the seats.

If you are interested in installing pink wheels try to go with a design that has thin spokes. Remember, the black has to be present everywhere. The empty spaces allow for the black to calm the look down a bit. You can find black ones at a good wheel wholesaler.

Don’t forget that although the style matches your preference it may not be to everyone else’s taste. But who cares, it’s your car. Plus you can keep your status and pride by only adding the pink shades to certain unique elements on the car.

Run Flat Tyres

It would have been amazing if we could drive our cars safely on a flat tyre, but that’s not possible. Aside from the safety issue, getting a flat tyre somehow always happens at times we least expect it. Safety is the main benefit. When run flat tyres are punctured it could still allow the vehicle to be driven and handled like normal. Having this ability to handle the car normally is essential particularly when you get a flat tyre while you are driving on a highway where traffic is heavy. Also the risk of changing tyres during peak hours on a major highway is reduced.


These tyres have stiffer and tougher rubber, which can temporarily carry the weight of the vehicle under lower tyre pressure. If you do get Self-Supporting tyres you will need a tyre pressure monitoring system because a driver may not notice their tyre has lost pressure without it. They give you protection against blow outs which are a common and dangerous occurrence since the 1930’s. Self-supporting run-flat tyres are now common on light trucks and passenger cars and typically provide for the vehicle to drive for a distance of 80 kilometers at a speed of about 80 kilometers per hour.

Auxiliary Supported

In this system, there is an additional support ring or insert attached to the wheel that can support the weight of the vehicle in the event of a loss of pressure. These systems generally offer better ride quality because they can be placed inside a standard tyre. The run flat insert has an unsurpassed ability to carry heavy vehicle loads for long distances at high speeds. It is the normal run flat selection for military vehicles, high-level executive protection vehicles, armored vehicles used by government, aid groups, or private contractors in conflict zones.

Clean a Car Battery

Before starting the job, the obvious needs to be stated – make sure that the car is turned off unless you are a fan of getting burned with extremely hot electricity. You could also short the circuits which could damage the electronics of your car.

  1. You will need to determine the configuration of the terminals as there are different types. Determining the configuration will help you to pick the correct wrench to loosen the nuts that keep the cables in place.
  2. Now, you need to unfasten the cables (negative and positive respectively) from their posts. Twisting might be necessary to release the cable as they might have been put on quite tightly.
  3. Before continuing with the process, checking for leaks and cracks is a must. Car batteries lose acid and could corrode the rest of the components of the engine. If you do see any cracks or leaks, the battery must be replaced.
  4. Cables and clamps could also have cracks along the wiring. They could easily be replaced with new parts.
  5. This is the part where a basic household item is required to clean the battery: baking soda. The ratio to mix baking soda and hot water in a small container is 1:17. This is usually a tablespoon of baking soda and a cup of hot water.
  6. Then it is time for the scrubbing and cleaning. A toothbrush would be ideal for this process so that your hands don’t come into contact with the battery.
  7. Dip the toothbrush into the baking soda and hot water mixture, and scrub away at the corrosion build up. Usually the clamps and cable posts contain the most build up and will need the maximum amount of cleaning.
  8. Once all the corrosion is off, it is an absolute necessity to rinse away any baking soda and loose corrosion with cool water.
  9. The battery has to be completely dry before replacing the cables and clamps to avoid short circuiting the system.

Make sure that the entire car is working perfectly before taking long trips. This would include the electrical components such as the battery and the mechanical components such as the wheels, tyres and engine parts.

Windshield Glass Repair

Go to an auto glass shop

The crack can be small or large, but making delays is not a good idea. The crack will keep spreading into several fissures. In the end, the glass will just shatter. You may get seriously injured if the glass shatters while you are on your way in your car.

So, as soon as you notice a tiny crack, find a good auto shop for a repair or replacement. Waiting for a few days or weeks may put your life at risk.

Check the crack

While you can wait for a day or two to find a good shop, don’t just sit idle. Instead, take a closer look at the crack to see how bad it is. If the crack is really small, you are not at risk and you can drive for a day or two carefully. But if the crack is rather big, you may want to head to the nearest shop to get it fixed as soon as possible.

Temporary solutions

You can opt for a temporary solution, but it may not work for more than a day or two. For instance, you can give a go to on auto glass repair kit. In case of a minimal damage, such as a small chip, you can count on a kit for a few days.

However, in the end, you will still need to take your car to a professional for repair. Now, if your car auto glass has a big crack, we suggest that you avoiding using an at-home kit. Things can go wrong. Further damage to the glass may result in the collapse of the roof of the car.


If you want to prevent cracks down the road, we suggest that you examine your auto glass on a regular basis. This way you can identify the problems before they get worse, which will help you avoid the risk and save money.

Aside from this, using regular sponges in order to clean the windshield is not recommended. Instead, what you need to do is buy a microfiber cloth to avoid scratches. Frequent cleaning of the windshield wipers is also a good habit. However, using low quality products is not good, as it will cost you a lot down the road. Also, the windshield should be of high quality.